Quick answer: A bulk leather coat buyer should approve the silhouette, actual back length, layering allowance and finished size set before ordering. MOTOGRIP’s Ashvale black sheepskin trench is one active long-line reference with notch lapels, button front and viscose lining. The jacket chart below helps plan body sizes, but the coat’s own finished length must be confirmed in the approved sample.
Decide what “long” means for this assortment
The Ashvale black sheepskin trench coat is described as knee-length with broad notch lapels, clean tailored panels and a button front. It uses genuine sheepskin leather and soft viscose lining, with two waist pockets and two interior pockets. A men’s coat, trench, duster and car coat can have different proportions. Quote the desired shoulder-to-hem or centre-back length rather than a category name alone.
Confirm fit over the intended outfit
The current men’s jacket chart below provides body and reference-garment measurements for an initial size breakdown. A long coat may be patterned with different hem, hip and back-length values from a shorter jacket, so do not treat the chart’s back row as Ashvale’s measured coat length. Fit-test the physical coat over a shirt, knitwear or blazer appropriate to the store’s customer. Check button closure, hem sweep and walking comfort.
Inspect a long garment as a whole
Review lapel roll, front button alignment, lining hang, pocket placement and the consistency of the leather panels. Compare the coat worn open and closed. Photograph the approved sample front, back and side with a measuring tape for length. Record any requested hem adjustment separately by size; scaling a long coat is not the same as merely widening the chest.
Request a project-specific coat quotation
Send the selected style, size breakdown, desired coat lengths, lining and colour requirements, authorised branding if any, quantity estimate and destination. Ask MOTOGRIP to confirm samples, commercial terms and production timing. This guide does not claim a fixed MOQ or guaranteed seasonal delivery.
Men’s jacket size chart for planning a size run
Values are inches. Body measurements describe the wearer; garment measurements describe the guide garment. Source: MOTOGRIP size guide. A wholesale specification and sample may use different finished measurements, so confirm the approved size set before production.
| Size | Body chest (in) | Garment chest (in) | Body waist (in) | Garment waist (in) | Center back (in) | Sleeve (in) | Shoulder (in) |
|---|---|---|---|---|---|---|---|
| XS | 35.5–37 | 42 | 33.5–35 | 32 | 25 | 26.65 | 17.5 |
| S | 38.5–40 | 45 | 36.5–38 | 35 | 25.5 | 26.9 | 18.25 |
| M | 41.5–43 | 48 | 39.5–41 | 38 | 26 | 27.25 | 19 |
| L | 44.5–46 | 51 | 42.5–44 | 41 | 26.5 | 27.5 | 19.75 |
| XL | 47.5–49 | 54 | 45.5–47 | 44 | 27 | 27.9 | 20.5 |
| XXL | 50.5–52 | 57 | 48.5–50 | 47 | 27.5 | 28.15 | 21.25 |
| 3XL | 53.5–55 | 60 | 51.5–53 | 50 | 28 | 28.5 | 22 |
| 4XL | 56.5–58 | 63 | 54.5–56 | 53 | 28.5 | 28.75 | 22.75 |
| 5XL | 59.5–61 | 66 | 57.5–59 | 56 | 29 | 29.15 | 23.5 |
Frequently asked questions
Is Ashvale real sheepskin leather?
Yes. Its active listing specifies genuine sheepskin leather.
Is the jacket chart the exact Ashvale length chart?
No. It is a size-planning reference; confirm Ashvale’s finished coat length on the approved sample.
What lining does Ashvale list?
The current product record specifies soft viscose lining.
Can a retailer request a different coat length?
Describe the required dimensions in the B2B brief; pattern feasibility and cost need project review.
Send a precise B2B enquiry
Explore the Ashvale Men’s Black Sheepskin Leather Trench Coat and use MOTOGRIP GEAR Wholesale & Private Label to send your product reference, size and quantity breakdown, destination and any authorised artwork. For the broader production route, read how MOTOGRIP handles B2B leather orders. MOTOGRIP will confirm feasibility and commercial terms for your project.