Quick answer: For a wholesale G-1 leather jacket order, approve the exact leather, removable collar construction, lining, hardware and finished size measurements on a physical sample. MOTOGRIP’s active black Ridgeway uses semi-aniline sheepskin, a removable black fur collar, quilted polyester lining, front zip and rib-knit cuffs and waistband. It is a specific starting design; commercial terms require a project quote.
Use the actual Ridgeway variant as the reference
The Ridgeway G-1 leather bomber offers a flight-jacket silhouette with a black leather body, removable black fur collar and rib-knit finishing. Its active black description specifies semi-aniline sheepskin and quilted polyester lining. A retailer should put the exact variant link and reference images in the brief, because another G-1 style can use different hide, collar, pockets or lining.
Decide how the collar should work for customers
A removable collar creates two visible styling options. Check the sample with the collar attached and detached: attachment points should lie flat, the neckline should look finished in either state, and the collar should not interfere with the front zip. Record what is included with each retail unit. Do not imply that a fur-trimmed collar establishes a temperature rating; layering needs depend on climate and wearer.
Review the jacket as a repeatable assortment
Compare sheepskin panels in neutral light and inspect zipper alignment, pocket symmetry, quilting seams and rib recovery. Ask for front, back and side sample photographs. If a buyer proposes a different collar colour, lining or label, treat it as a revised specification and seek an updated sample. Document packaging and care-information placement for the destination market.
Fit-test over the intended layer
The men’s jacket chart below helps plan wearer sizes for an initial retail run. Have fit models try the G-1 over the shirt or knit typical of the target market. Measure the approved sample’s chest, waist, shoulder, sleeve and centre-back length. The published guide is not a promise that a revised G-1 will retain those finished measurements. Confirm grading before committing to quantities by size.
Make the wholesale enquiry quote-ready
Send MOTOGRIP the Ridgeway link, selected colour and leather, size quantities, sample notes, authorised branding artwork if relevant and delivery destination. The response should confirm production feasibility, MOQ if any, price and schedule in writing; this article does not invent those terms.
Men’s jacket size chart for planning a size run
Values are inches. Body measurements describe the wearer; garment measurements describe the guide garment. Source: MOTOGRIP size guide. A wholesale specification and sample may use different finished measurements, so confirm the approved size set before production.
| Size | Body chest (in) | Garment chest (in) | Body waist (in) | Garment waist (in) | Center back (in) | Sleeve (in) | Shoulder (in) |
|---|---|---|---|---|---|---|---|
| XS | 35.5–37 | 42 | 33.5–35 | 32 | 25 | 26.65 | 17.5 |
| S | 38.5–40 | 45 | 36.5–38 | 35 | 25.5 | 26.9 | 18.25 |
| M | 41.5–43 | 48 | 39.5–41 | 38 | 26 | 27.25 | 19 |
| L | 44.5–46 | 51 | 42.5–44 | 41 | 26.5 | 27.5 | 19.75 |
| XL | 47.5–49 | 54 | 45.5–47 | 44 | 27 | 27.9 | 20.5 |
| XXL | 50.5–52 | 57 | 48.5–50 | 47 | 27.5 | 28.15 | 21.25 |
| 3XL | 53.5–55 | 60 | 51.5–53 | 50 | 28 | 28.5 | 22 |
| 4XL | 56.5–58 | 63 | 54.5–56 | 53 | 28.5 | 28.75 | 22.75 |
| 5XL | 59.5–61 | 66 | 57.5–59 | 56 | 29 | 29.15 | 23.5 |
Frequently asked questions
What leather is used on the black Ridgeway?
The active black variant lists semi-aniline sheepskin leather.
Is the fur collar removable?
Yes, the current Ridgeway listing describes a removable black fur collar.
Does the listing specify the lining?
Yes, it specifies quilted polyester lining.
Is this a certified protective riding jacket?
No certification or protective performance claim is made in this guide.
Discuss your wholesale project
Explore Ridgeway Men’s G-1 Leather Bomber Jacket and send the style reference, size breakdown, quantity and destination through MOTOGRIP Wholesale & Private Label. For the broader process, read MOTOGRIP’s B2B order guide. A project-specific written proposal should confirm the final specification and terms.