Quick answer: For a wholesale leather puffer order, ask what the outer leather, padding and lining actually are, then confirm hood details by colour and fit over the planned winter layer. MOTOGRIP’s Wexford is a soft lambskin napa puffer with fibre-ball padding and a removable hood. Supply a size and colour breakdown for a project-specific wholesale quote.
Specify the three material layers
The Wexford hooded leather puffer has a soft lambskin napa shell, thick fibre-ball padding and polyester inner lining according to its current listing. That is more useful to a buyer than the single word “puffer”. Do not relabel its fibre-ball padding as down or infer a temperature rating from its appearance. If comparing another MOTOGRIP puffer, check that product’s own fill and lining.
Separate colour from construction
Wexford appears in Cherry, Navy, White and Black. The Cherry, Navy and White galleries show contrasting fur-trimmed hoods; the Black design is shown with an untrimmed hood. The hood is removable, while its trim differs by colour. A wholesale order must name colour and photograph the exact approved variant, not assume a catalogue image represents every option.
Check pocket layout and winter fit
The listing records six exterior and two interior pockets, along with chest flaps, lower welt pockets and a sleeve flap pocket. Test pocket access with the hood on and off and check the zipper over a sweater. Thick padding can make the fit feel closer; use the men’s jacket chart below and approve a physical size-set before assigning a full retail run.
Prepare a winter buying brief
Provide intended market, colours, quantities by size, desired trim configuration, label requirements and shipping destination. Ask for written confirmation of the sample, material choices, quote, minimum quantities and timing. A winter-season content angle does not establish that an order can arrive by a particular holiday or temperature.
Men’s jacket size chart for planning a size run
Values are inches. Body measurements describe the wearer; garment measurements describe the guide garment. Source: MOTOGRIP size guide. A wholesale specification and sample may use different finished measurements, so confirm the approved size set before production.
| Size | Body chest (in) | Garment chest (in) | Body waist (in) | Garment waist (in) | Center back (in) | Sleeve (in) | Shoulder (in) |
|---|---|---|---|---|---|---|---|
| XS | 35.5–37 | 42 | 33.5–35 | 32 | 25 | 26.65 | 17.5 |
| S | 38.5–40 | 45 | 36.5–38 | 35 | 25.5 | 26.9 | 18.25 |
| M | 41.5–43 | 48 | 39.5–41 | 38 | 26 | 27.25 | 19 |
| L | 44.5–46 | 51 | 42.5–44 | 41 | 26.5 | 27.5 | 19.75 |
| XL | 47.5–49 | 54 | 45.5–47 | 44 | 27 | 27.9 | 20.5 |
| XXL | 50.5–52 | 57 | 48.5–50 | 47 | 27.5 | 28.15 | 21.25 |
| 3XL | 53.5–55 | 60 | 51.5–53 | 50 | 28 | 28.5 | 22 |
| 4XL | 56.5–58 | 63 | 54.5–56 | 53 | 28.5 | 28.75 | 22.75 |
| 5XL | 59.5–61 | 66 | 57.5–59 | 56 | 29 | 29.15 | 23.5 |
Frequently asked questions
Is Wexford filled with down?
No down claim is supported. The active listing says thick fibre-ball padding.
Is the hood removable?
Yes, the Wexford description lists a removable hood.
Do all Wexford colours show fur trim?
No. Cherry, Navy and White show trim; Black is shown without it.
Does MOTOGRIP quote bulk puffer orders?
Business buyers may enquire through the wholesale page; terms are confirmed for the specific brief.
Send a precise B2B enquiry
Explore the Wexford Men’s Hooded Leather Puffer Jacket and use MOTOGRIP GEAR Wholesale & Private Label to send your product reference, size and quantity breakdown, destination and any authorised artwork. For the broader production route, read how MOTOGRIP handles B2B leather orders. MOTOGRIP will confirm feasibility and commercial terms for your project.